How to add a proxy to GoLogin: HTTP or SOCKS5, where to enter it, checking the Singapore IP and rotating
In this article
To add your own proxy to GoLogin, go to the All profiles page, click the + button in the profile's Location column, click the computer icon, enter the IP (host), port, username and password, and click Connect. GoLogin checks the proxy straight away. This guide follows GoLogin's own documentation as of October 2026 and adds what matters with a Singapore 4G proxy: the right port for HTTP or SOCKS5, checking the Singapore IP inside the profile, and rotating without tangling your sessions.
Before you start
- The GoLogin app. The labels below are the ones GoLogin's help center uses as of October 2026; the layout can change between versions.
- Your proxy details. In 65Proxy, open My proxies: the host, the HTTP port, the SOCKS5 port, the username, the password and the rotation link. HTTP and SOCKS5 use different ports.
- A profile for the proxy. One account per profile and one proxy per profile is the tidiest setup; GoLogin's own FAQ also recommends a separate proxy for each profile.
GoLogin also sells its own proxies, which you pick by country with Choose location or proxy and pay for by traffic. That's a separate option. This guide is about adding a proxy you already have.
HTTP or SOCKS5 in GoLogin?
GoLogin's documentation says that when you add a proxy, the HTTP or SOCKS protocol is selected automatically "based on availability", and you can change it later. In practice, the port you enter decides:
| What you enter | Protocol to end up with | Notes |
|---|---|---|
| Host + the HTTP port | HTTP | The simplest choice; HTTPS websites still load normally through it |
| Host + the SOCKS5 port | SOCKS5 | Also fine; carries more kinds of traffic |
Both work well in an antidetect browser, so pick one and only switch if a particular site misbehaves. If the protocol GoLogin shows doesn't match the port you entered, change it in the proxy settings. The difference between the two is explained in SOCKS5 vs HTTP proxies.
Adding the proxy to a profile
As of October 2026, GoLogin's documentation calls this "the simplest way":
- On the All profiles page, find the Location column and click the + button on the profile.
- In the window that opens, click the computer icon and enter your IP (the host from My proxies), port, username and password.
- Click Connect. GoLogin checks the proxy right away: a green indicator means it works, a red one means it doesn't (see common errors).
Other ways GoLogin's docs list:
- Paste a line: hover over the Location column and use the Paste proxies button (or the hotkeys). The formats in GoLogin's docs include these, filled with your own details:
HOST:PORT:USER:PASS
socks5://USER:PASS@HOST:PORT- From the profile settings: the 3 dots on the profile, then Settings, then Proxy, then Your proxy.
- For many profiles: Import proxies on the Proxies page, or select profiles and use Proxy in the bulk actions row, then Update proxy. Keep one proxy per client.
GoLogin's documentation says the profile's time zone is matched to the proxy IP automatically, and its WebRTC setting has two options: Based on IP (WebRTC reports the proxy's IP) and Off. Leave WebRTC on Based on IP unless you have a reason not to; some sites need WebRTC to work.
Checking the Singapore IP inside the profile
Run the profile, then check for yourself:
- Open ipinfo.io. The IP should be the proxy's,
countryshould beSG, theorgfield should name a Singapore mobile carrier, and the time zone should beAsia/Singapore. - Open BrowserLeaks' WebRTC test. Your home IP must not appear.
- Check the browser's time zone matches
Asia/Singapore. If it doesn't, the profile may be holding an older proxy location: re-check the proxy in the profile and reopen it.
A full checklist (DNS, WebRTC, time zone) is in how to check a proxy.
Rotating the IP
Each 65Proxy proxy has its own rotation link under My proxies. GoLogin's add-proxy window has no separate field for it. Its docs do show a paste format with a change-IP URL in square brackets after the port, but don't explain what GoLogin then does with it, so the dependable method is to call the link yourself: open it in a normal browser tab, or from a script. Then:
- At most once every 5 minutes per proxy.
- Close the profile before rotating if the next profile is waiting on the same proxy; after rotating, open it and check the IP again.
- Don't rotate mid-session: not during a login, a payment or an upload.
- Treat the link like a password: anyone who has it can rotate your IP.
Code that calls the link and waits for the new IP is in rotating proxy IPs via API. How to run several profiles on one proxy, in turn, is in adding a proxy to antidetect browsers.
Common errors
- Red indicator after Connect: GoLogin's FAQ lists a wrong IP, port, username or password, a proxy server that doesn't respond, or a blocked or expired proxy. With 65Proxy, also check that the protocol matches the port and that your plan hasn't expired.
- Wrong username or password: copy them again from My proxies and watch for spaces at the start or end. Outside GoLogin, the same mistake shows up as error 407.
- The profile uses a different country: you may have picked a country from GoLogin's own proxies instead of entering yours. Use the computer icon and enter your proxy.
- You rotated but the old IP is still there: wait a few seconds for the 4G device to reconnect, then close and reopen the profile. A second rotation within 5 minutes won't go through.
- Pages load slowly right after rotating: the device is reconnecting. Give it a few seconds.
To rule GoLogin out, test the proxy on its own:
curl -s -m 15 -x "http://USER:PASS@HOST:PORT" https://ipinfo.io/jsonIf curl works and GoLogin doesn't, the problem is in the profile. More fixes are in common proxy errors.
Singapore 4G proxies from 65Proxy for GoLogin
Every order is its own proxy, not shared with other customers, on a Singapore mobile network (Singtel or M1). It comes with HTTP/HTTPS and SOCKS5 with a username and password, and a rotation link you can also call as an API, at most once every 5 minutes. The plans by duration are priced 1 day $4, 7 days $13, 1 month $32 with 200GB each, and there are monthly plans with more bandwidth (500GB $40, 1TB $65). See Singapore 4G proxy pricing, or run the setup above in a free 1-hour trial first. Use it for your own or your clients' real accounts, within each platform's terms.
Frequently asked questions
Does GoLogin detect HTTP or SOCKS5 by itself?
Yes, according to its docs: the protocol is chosen automatically based on availability, and you can change it later. Enter the port that matches the protocol you want.
Can several GoLogin profiles share one proxy?
They can, but GoLogin's own FAQ doesn't recommend it, because websites may link accounts that share an IP. Give each profile, or at least each client, its own proxy; for one business, you can work profiles one after another on one proxy.
Do I need GoLogin's own proxies as well?
No. GoLogin's built-in proxies are a separate, traffic-based option. A profile with your own proxy doesn't need them.