How to add a proxy to BitBrowser: HTTP or SOCKS5, where to enter it, checking the Singapore IP and rotating
In this article
To add a proxy in BitBrowser, open Browsers, click Add, set the Proxy Method to Custom, choose HTTP or SOCKS5 as the Proxy Type, fill in Host, Port, Username and Password, then run the proxy check and save the profile. This guide follows BitBrowser's own help center as of October 2026 and adds what matters with a Singapore 4G proxy: the right port for each type, checking the Singapore IP inside the profile, and using the rotation link without tangling your sessions.
Before you start
- The BitBrowser app. The labels below are the ones BitBrowser's help center uses as of October 2026. The help center calls profiles "browsers" (and sometimes "windows"); BitBrowser's newer blog guides call them profiles. Menus can move between versions.
- Your proxy details. In 65Proxy, open My proxies: the host, the HTTP port, the SOCKS5 port, the username, the password and the rotation link. HTTP and SOCKS5 use different ports.
- A profile for the proxy: a new one, or an existing one you edit. One account per profile and one proxy per profile is the tidiest setup.
BitBrowser's IP extraction through provider APIs and its ready-made settings for a few big providers are separate options. This guide is about a proxy you already have. If your team also uses GoLogin, its steps work differently: see GoLogin proxy setup.
HTTP or SOCKS5 in BitBrowser?
With the Custom method, BitBrowser's Proxy Type list covers HTTP, HTTPS, SOCKS5 and SSH. With a 65Proxy proxy you use one of two:
| Proxy Type in BitBrowser | Port to use | Notes |
|---|---|---|
| HTTP | The HTTP port from My proxies | The simplest choice; HTTPS websites still load normally through it |
| SOCKS5 | The SOCKS5 port | Also fine; carries more kinds of traffic |
| HTTPS or SSH | Not used | 65Proxy gives you an HTTP port and a SOCKS5 port |
Both work well in an antidetect browser, so pick one and only switch if a particular site misbehaves. What matters is that the type matches the port: the HTTP port with SOCKS5 selected, or the reverse, is the most common reason a check fails. The difference between the two is explained in SOCKS5 vs HTTP proxies.
Adding the proxy to a profile
As of October 2026, BitBrowser's help center describes these steps:
- Go to Browsers and click Add (or open an existing profile to edit it).
- Fill in Browser Name, and Group if you sort profiles into groups.
- In the proxy settings, set Proxy Method to Custom. (Direct Mode is for using your own network without a proxy.)
- Leave the IP lookup service on its default for now. The help center lists IP-API, IP123 and an option only for Luminati proxies.
- Choose Proxy Type: HTTP or SOCKS5.
- Fill in Host, Port, Username and Password from My proxies, using the port that matches the type you picked.
- Run the proxy check. The help center calls it Proxy Detection; BitBrowser's 2026 blog guide calls the button Check Proxy. A successful check shows the proxy's IP and its location details.
- Save the profile.
Other ways BitBrowser's help center lists:
- Proxy IP Management: click Proxy IP in the left menu, open the Proxy IP Management tab and use Add Proxy or Batch Add Proxy. Saved proxies can then be picked when you create a profile, or attached to one with the Bind Window icon.
- Batch Import: on Browsers, click Batch Import, download the template, put
httporsocks5in the proxy type column and the proxy in this form:
HOST:PORT:USER:PASSBefore you start working, make sure the profile's fingerprint follows the proxy, not your computer: the time zone should be Asia/Singapore and the location in Singapore. Random Fingerprint reshuffles the fingerprint fields, so check the result inside the profile (next section) rather than trusting a label.
Checking the Singapore IP inside the profile
Open the profile, then check for yourself:
- Open 65Proxy's IP check tool in the profile. It shows the public IP, country and network, tells you whether it's a Singapore IP, and compares the browser's time zone with the IP. The IP should be the proxy's and the time zone
Asia/Singapore. - Open BrowserLeaks' WebRTC test. Your home IP must not appear.
- If the page shows your home IP instead, see common errors.
Geolocation databases sometimes disagree about an IP. BitBrowser's FAQ says different lookup channels can resolve the country differently, and that what matters is the IP itself; if the check shows an odd location for a Singapore IP, switch the IP lookup service and check again. A full checklist (DNS, WebRTC, time zone) is in how to check a proxy.
Rotating with Refresh URL
Each 65Proxy proxy has its own rotation link under My proxies. BitBrowser's help center describes a Refresh URL field when you add a proxy in Proxy IP Management, for proxies that support refreshing by URL: clicking the refresh icon calls the link and changes the IP, and if several profiles use the same proxy, the IP changes for all of them. The profile list also shows a refresh button for proxies that have a refresh URL. You can just as well call the link yourself, in a browser tab or from a script. Either way:
- At most once every 5 minutes per proxy.
- Close the profile before rotating if the next profile is waiting on the same proxy, then open it and check the IP again.
- Don't rotate mid-session: not during a login, a payment or an upload.
- Treat the link like a password: anyone who has it, or who can see the proxy's settings, can rotate your IP.
BitBrowser's settings can also stop a profile opening when its IP's country or region has changed; rotating a 65Proxy proxy keeps the IP in Singapore. Code that calls the link and waits for the new IP is in rotating proxy IPs via API.
Common errors
- The proxy check fails: the type and port don't match, the host or port has a typo, or the plan has expired. BitBrowser's proxy failure guide says to open the profile's settings and run Proxy Detection again; if it still fails, the problem is the proxy, not BitBrowser.
- Wrong username or password: copy them again from My proxies and watch for spaces at the start or end. Outside BitBrowser, the same mistake shows up as error 407.
- The profile won't open after you rotate: check whether the option that stops profiles opening when the IP changes is on. It triggers after every rotation, so turn it off for profiles on a rotating proxy.
- You rotated but the old IP is still there: wait a few seconds for the 4G device to reconnect, then close and reopen the profile. A second rotation within 5 minutes won't go through.
To rule BitBrowser out, test the proxy on its own:
curl -s -m 15 -x "http://USER:PASS@HOST:PORT" https://ipinfo.io/jsonIf curl works and BitBrowser doesn't, the problem is in the profile settings. More fixes are in common proxy errors.
When this setup isn't the right fit
- Several profiles open at the same time on one proxy. They share one IP, and a refresh changes it for all of them. Give each profile its own proxy.
- Accounts that aren't meant to be in Singapore. A Singapore IP on a profile for a shop based elsewhere is a mismatch, not an improvement.
- A fixed IP for an allowlist. The IP changes every time you rotate.
- Creating accounts in bulk or getting around bans. A proxy doesn't make that acceptable, and this guide isn't for it.
Singapore 4G proxies from 65Proxy for BitBrowser
Every order is its own proxy, not shared with other customers, on a Singapore mobile network (Singtel or M1). It comes with HTTP/HTTPS and SOCKS5 with a username and password, and a rotation link you can also call as an API, at most once every 5 minutes. The plans by duration are priced 1 day $4, 7 days $13, 1 month $32 with 200GB each, and there are monthly plans with more bandwidth (500GB $40, 1TB $65). See Singapore 4G proxy pricing, or run the setup above in a free 1-hour trial first. Use it for your own or your clients' real accounts, within each platform's terms.
Frequently asked questions
Should I choose HTTP or SOCKS5 in BitBrowser?
Either works. HTTP is the simplest; SOCKS5 carries more kinds of traffic. Use the matching port from My proxies, and only switch if a particular site misbehaves.
Can several BitBrowser profiles use one proxy?
Yes, but they share one IP, and BitBrowser's own docs note that refreshing the IP changes it for every profile on that proxy. Work them one after another for the same business, or give each client its own proxy.
Where does the rotation link go?
In the Refresh URL field, which BitBrowser's help center shows when you add a proxy in Proxy IP Management (as of October 2026). It's optional: the link works on its own too.