How to add a proxy to GenLogin: HTTP or SOCKS5, where to paste it, checking the Singapore IP and rotating
In this article
To add a proxy in GenLogin, click Create Profile (or edit a profile), open the Network section, choose Your Proxy, set the Proxy Type to HTTP Proxy or Socks5 Proxy, paste HOST:PORT:USER:PASS into Proxy host, then click Check proxy and Create profile. This guide follows GenLogin's own knowledge base as of October 2026 and adds what matters with a Singapore 4G proxy: the right port for each type, checking the Singapore IP inside the profile, and rotating without tangling your sessions.
Before you start
- The GenLogin app. The labels below are the ones GenLogin's knowledge base uses as of October 2026, written for GenLogin 3.0; menus can move between versions.
- Your proxy details. In 65Proxy, open My proxies: the host, the HTTP port, the SOCKS5 port, the username, the password and the rotation link. HTTP and SOCKS5 use different ports.
- A profile for the proxy: a new one from Create Profile, or an existing one you edit. One account per profile and one proxy per profile is the tidiest setup.
GenLogin's own proxies (Gen Proxy) and its ready-made types for providers that connect with an API key are separate options. This guide is about a proxy you already have.
HTTP or SOCKS5 in GenLogin?
Under Your Proxy, GenLogin's Proxy Type list includes HTTP Proxy, Socks4 Proxy and Socks5 Proxy, plus the API-key types for specific providers. With a 65Proxy proxy you use one of two:
| Proxy Type in GenLogin | Port to use | Notes |
|---|---|---|
| HTTP Proxy | The HTTP port from My proxies | GenLogin's docs call it the preferred type; HTTPS websites still load normally through it |
| Socks5 Proxy | The SOCKS5 port | Also fine; carries more kinds of traffic |
| Socks4 Proxy or an API-key type | Not used | 65Proxy gives you an HTTP port and a SOCKS5 port |
Both work well in an antidetect browser, so pick one and only switch if a particular site misbehaves. What matters is that the type matches the port: the HTTP port with Socks5 Proxy selected, or the reverse, is the most common reason a check fails. The difference between the two is explained in SOCKS5 vs HTTP proxies.
Adding the proxy in the Network section
As of October 2026, GenLogin's knowledge base describes these steps and fields:
- Click Create Profile in the GenLogin menu (or edit an existing profile) and go to the Network section.
- Choose Your Proxy. (Gen Proxy picks one of GenLogin's own proxies; Without Proxy uses your own network.)
- Set Proxy Type to HTTP Proxy or Socks5 Proxy.
- In Proxy host, enter the proxy in
IP:PORT:USER:PASSform. With 65Proxy, that'sHOST:PORT:USER:PASS, using the port that matches the type you picked. GenLogin's docs say Proxy port, User name and Password then display the other parts; if they don't split correctly, fill them in one by one. Clear Proxy empties the fields. - Click Check proxy. According to the docs, it shows the proxy's IP address, location and status, including country and time zone.
- Click Create profile.
For many profiles at once, select them, click Update proxy in the top menu bar, choose Common as the Connection type, paste one proxy per line and click Update. Keep one proxy per client.
GenLogin's defaults already make the profile follow the proxy. Keep them:
- Location. Fill timezone based on the external IP is checked by default, so the time zone follows the proxy. Fill geolocation based on the external IP with Prompt does the same for location. Avoid Allow: the docs say it uses your computer's real location even with a proxy.
- WebRTC. Forward is the default when you use a proxy. Real shows your local IP, so don't pick it for a proxied profile.
Checking the Singapore IP inside the profile
Start the profile, then check for yourself:
- Open 65Proxy's IP check tool in the profile. It shows the public IP, country and network, tells you whether it's a Singapore IP, and compares the browser's time zone with the IP. The IP should be the proxy's and the time zone
Asia/Singapore. - Open BrowserLeaks' WebRTC test. Your home IP must not appear.
- If the page shows your home IP instead, see common errors.
Geolocation databases sometimes disagree about an IP. If Check proxy shows an odd city or country for a Singapore IP, switch the IP checker service and check again. A full checklist (DNS, WebRTC, time zone) is in how to check a proxy.
Rotating the IP
Each 65Proxy proxy has its own rotation link under My proxies. GenLogin's knowledge base lists an Enable change IP option in the proxy panel (and in Update proxy), described in one line as allowing the proxy IP to be changed via a URL. The docs don't show its field or say when GenLogin calls the URL, so the dependable method is to call the link yourself: open it in a normal browser tab, or from a script. Then:
- At most once every 5 minutes per proxy.
- Close the profile before rotating if the next profile is waiting on the same proxy; after rotating, open it and check the IP again.
- Don't rotate mid-session: not during a login, a payment or an upload.
- Treat the link like a password: anyone who has it can rotate your IP.
GenLogin's Change IP when start profile option belongs to the API-key provider types, not to an HTTP or SOCKS5 proxy. Code that calls the link and waits for the new IP is in rotating proxy IPs via API. How to run several profiles on one proxy, in turn, is in adding a proxy to antidetect browsers.
Common errors
- Check proxy fails: the type and port don't match, the host or port has a typo, or the plan has expired. Look at each field after pasting: a split in the wrong place puts the port into the username.
- Wrong username or password: copy them again from My proxies and watch for spaces at the start or end. Outside GenLogin, the same mistake shows up as error 407.
- The profile shows your home IP: the profile may still be on Without Proxy, or WebRTC is set to Real. Choose Your Proxy, set WebRTC back to Forward, and reopen the profile.
- The time zone is wrong: Fill timezone based on the external IP has been unchecked. Check it again, or set
Asia/Singaporeby hand. - You rotated but the old IP is still there: wait a few seconds for the 4G device to reconnect, then close and reopen the profile. A second rotation within 5 minutes won't go through.
To rule GenLogin out, test the proxy on its own:
curl -s -m 15 -x "http://USER:PASS@HOST:PORT" https://ipinfo.io/jsonIf curl works and GenLogin doesn't, the problem is in the profile settings. More fixes are in common proxy errors.
When this setup isn't the right fit
- Several profiles open at the same time on one proxy. They share one IP, and rotating changes it for all of them. Give each profile its own proxy.
- Accounts that aren't meant to be in Singapore. A Singapore IP on a profile for a shop based elsewhere is a mismatch, not an improvement.
- A fixed IP for an allowlist. The IP changes every time you rotate.
- Creating accounts in bulk or getting around bans. A proxy doesn't make that acceptable, and this guide isn't for it.
Singapore 4G proxies from 65Proxy for GenLogin
Every order is its own proxy, not shared with other customers, on a Singapore mobile network (Singtel or M1). It comes with HTTP/HTTPS and SOCKS5 with a username and password, and a rotation link you can also call as an API, at most once every 5 minutes. The plans by duration are priced 1 day $4, 7 days $13, 1 month $32 with 200GB each, and there are monthly plans with more bandwidth (500GB $40, 1TB $65). See Singapore 4G proxy pricing, or run the setup above in a free 1-hour trial first. Use it for your own or your clients' real accounts, within each platform's terms.
Frequently asked questions
Should I choose HTTP Proxy or Socks5 Proxy in GenLogin?
Either works. GenLogin's docs lean towards HTTP Proxy, and it's the simplest; Socks5 Proxy carries more kinds of traffic. Use the matching port from My proxies, and only switch if a particular site misbehaves.
Can several GenLogin profiles use one proxy?
Yes, but they share one IP, and rotating changes it for all of them. Work them one after another for the same business, or give each client its own proxy.
What does Enable change IP do?
GenLogin's knowledge base only says it allows changing the proxy IP via a URL. Until you've seen how your version uses it, call the rotation link yourself and check the IP afterwards.